Automotive Tools For Your Home Garage

You can save hundreds of dollars on garage fees every year by carrying out minor servicing and maintenance jobs on your car yourself. Armed with a selection of widely available automotive tools, a garage manual for your car, and enough time and patience to get a job done properly, pretty much anyone can carry out the routine tasks needed to keep your car on the road and running smoothly.

One of the most satisfying aspects of carrying out maintenance tasks on your vehicle aside from saving money on expensive garage bills is that you are able to get an understanding of how the car works, and the more you understand about the vehicle, the easier it is to put things right in the event of a breakdown.

Any home garage requires a good selection of automotive tools to carry out work on a car. Some vehicles from certain manufacturers have non standard machining and sizes used throughout their construction, and you will need to get automotive specialty tools designed for the purpose of working on that particular car from a motor store. No home workshop is complete without a trolley jack and axle stands to allow you to get under the car and do things like oil changes and exhaust checks.

For most small jobs, such as changing the oil or replacing filters, changing the spark plugs and brake pads on your vehicle, general tools such as a wrench and a screwdriver are all that is required, and these are widely available in most hardware stores. It is a good idea to keep your automotive tools separate from other tools you may have, because if you begin a job and then discover that the tool you want to use is missing, it can cause major headaches.

Twenty years ago, cars were much simpler to maintain and understand than they are today. Computerised engine management systems and adjustable fuel injectors are now commonplace, and special automotive diagnostic tools are required in order to make adjustments to the engine timing and fuel air mix, whereas in the past, these jobs could be done quite simply.

Areas of the car that almost anyone can handle the regular maintenance of are the interior and exterior panels. Simple scratches and dents to the bodywork are easy to repair using a soft mallet for panel beating and abrasive paper, spray paint and filler for paintwork repairs.

If your car is well used, the interior is likely to start to look tired and dated and in need of a little tender loving care. Thankfully, there are many automotive upholstery tools available to help you to tidy up the interior of the car and bring it back to its sparkling best. You can repair small tears and burns on the seats by darning them or applying a repair patch over the affected area. The trim of the car can be brought back to life with a good buffing using a polisher, while using specialist tools it is possible to repair the carpets or even replace them.

Of course there is much more to owning and maintaining a car than just tightening nuts and sewing up split seams, and you may find that you want to add non-stock parts such as a more efficient air filter or new exhaust to improve performance, and once you understand the basics of automotive maintenance, upgrades and tuning will become more accessible, saving you even more money in the long term.

Doing small jobs yourself can save you plenty of money on garage bills, and having the right automotive tools to get the jobs done is an excellent idea that will save you time and effort in the long run. However, one of the most important things for any mechanic to know is when to pass over a job to an expert, and rather than potentially do more damage than good, to get a qualified mechanic to carry out work on a car.

If you are looking for car rental then check out this page .

Automotive Tools For The Road Warrior

In today’s highly mobile world, many spend countless hours and miles traveling in their automobiles for work and vacation. Modern cars are also far more reliable than the cars of 30 years ago. We have begun to take them for granted. We expect them to just work day in day. However, the time to learn the lessons of basic car repair is not on a deserted highway at 2 am on the way up to the ski slopes! Automobiles still breakdown, have flat tires and batteries run out of juice. Most people think that you have to be a space shuttle engineer to even open the hood of a 21st century car. While it is true that computer technology has drastically changed the way engines and cars operate, there are still some basic car repairs that you can perform in a pinch. You must carry some basic automotive tools with you at all times in order to carry them out.

A basic kit with automotive tools doesn’t have to break the bank or require you tow a trailer full of tools. You can go as basic as you want and add more tools as your needs change. The first thing to do is put together a list of automotive tools that you will probably need. (I have included one in this article.) You will be surprised to find that you own many of them already. The real chore is to get them together in one place and carry them with you. You will also need something to carry them in. First see if you have an old duffle bag stuffed in a closet. If not you can probably get one cheap at an Army surplus store. Now it is time to look at our automotive tool list and start collecting them.

Automotive tools for your kit should include the following: set of various screwdrivers (both flat head and Phillips), crescent wrench, pliers, torque wrench, pocket knife, jumper cables, battery terminal brush, spare fuses, 1 quart of oil, duct tape, flashlight, gloves, medical kit, road flares, reflective vest, blanket and funnel. Make sure your car jack and tire iron are in their proper place in your car’s trunk. After you have gathered these items and put them in your old duffle bag, store it in your truck so its there when you need it. These items can prove to be invaluable to help you fix a minor problem and be on your way.

Types Of Automotive Tools

No matter your area of automotive expertise or personal skill level; if you love to work on cars in your garage in your spare time, or call the business your trade; whether you’re into the classic muscle cars of the sixties and seventies, or the latest auto to roll off of the assembly lines in Detroit, there’s a wide array of automotive specialty tools that are the perfect fit for your tool chest.

If you’re into the generalized wheel area of cars (tires and wheels), standard wheel cover tools, torque socket sets, torque extensions, wheel stud installers, tire repair kits, needles and the necessary plugs to fill the holes are just a few necessary items that you should keep handy. There are different tools specifically designed for trucks and SUV’s, so if you either drive one, or plan to do work on such vehicles, careful attention to the exact uses for tools is a key element to your success.

When it comes to fuel systems and the necessary tools for service, maintenance and repair, diagnostic testers lead the pack in importance, if you don’t know what the problem is, just how are you supposed to fix it. Fuel injector pulse testers and fuel injection probes are the two most popular tools in this category.

Brake bleeders and brake bleeder vacuums are just a few of the automotive tools you’ll need if you’re involved with the wonderful world of brakes. Be sure that the brake bleeder attachment is the proper size for the vehicle that you are working on. If it’s not, there are different attachments available, so be sure to check your inventory before you agree to any job.

Suction cups to hold a door window in place while work is performed in and around the door area are just another tool designed to make the life of an automotive specialist a bit easier. Specialty knives and locking strip tools are also complete tasks that could be done with other tools, but why would you want to do all of that extra work when you don’t need to?

Of course, just as any time you’re using any type of tool, taking the proper safety precautions and wearing adequate safety gear is the most valuable part to any successful effort. A tool or automotive part car be replaced with a quick phone call or click of a mouse, but your body parts are a bit more difficult to be restore and/or replace. Always follow the manufacturer’s directions for use and safety for all of automotive tools.

The Automotive Employment Market Is Still an Open Playing Field

In the automotive employment market there are still very attractive job opportunities available all over the world. So if you are in the automotive employment market and want to make a change there are still a lot of opportunities all over the world.

In this modern world there do exist a massive shortage highly skilled automotive technicians all over the world. So if you are a highly skilled auto technician you can choose where you want to work in the world.

By just applying on one of the many automotive recruitment companies web pages, and they will search a job opportunity for you any place in the world. The fact is that a lot of emerging automotive markets have opened up in reasoned years, due to the power shift in the automotive industry.

This automotive employment market is going to become even bigger in the future as all new type of cars is going to hit the market. Like all the “EV” cars that are still in the prototype phase. All these cars will have new technology implemented into them, so new personnel must be trained to work on them in the future.

This will bring a paradigm shift into this automotive employment market, even the training methods and the skill sets that must be trained have to change in the very near future.

This will cause the manufacturers to start running extensive training and develop programs, to have highly skilled technicians to assist them to establish their brand. There will be coming new brands and brand name into the playing field and these brands will need to still build their names in the market place.

To build a brand name you need a powerful after sales service you can assist your customers with. This alone will create a new automotive employment market to the auto industry; just imagine an electronic or chemical engineer working at your local car dealership.

It may sound farfetched but it is possible as the cars in the future will be driven with power plants like fuel cells, hydrogen emission and electric motors. All of this is going to come to the market place in this modern world sooner than most of us do realize. So the predictions are that a big portion of the existing automotive workforce will leave.

They will leave this workforce as they are from the old school with old school principles that will become extinct with this new technology. The human tendencies are that you will stay ignorant if you become a member of the old school club. This only happens as the older people were conditioned that they can only learn something up to a certain age. All of us know this is not true but the system wants them to leave as it is harder to change and old horse to get rid of his or her habits

The system was created to develop a group of slaves that would be easier to condition, into what this slave system needs and not what the workers needs. That is one of the reasons why the older leading hands in the automotive employment market gets removed or retrenched. The general modern business conceptions are that older people are resisters to modern business, as they don’t want to change.

If all this highly skilled people are removed in the future the whole automotive industry will suffer a massive skills and brain lost that could have passed on to the younger people. Findings are that most of this older people in the automotive industry don’t want to share their knowledge and skills anymore, because they don’t see themselves as resistors for future development in the automotive industry.

So the automotive employment market will suffer great losses in the near future, due to this phenomenon.

Rocco van Rooyen is an Author on Automotive Solutions. As an Entrepreneur and Author on the subject, he is at the forefront to provide solutions to all automotive related problems.

Automotive Rapid Prototyping Fail First Paradox

New product development and innovation is much more difficult and time consuming than most other business activities. Automotive rapid prototyping greatly enhances learning speed and reduces the risk of new automotive parts development.

Historically, the automotive industry has been using rapid prototyping as an important tool in the automotive parts design process. The extremely fast-paced automotive design cycles require an extremely fast prototyping system which can produce car parts fast and inexpensively.

The main objective of automotive prototyping is to learn quickly: how a new automotive product behaves in its natural working environment, before transferring the prototype to the production line. Many times, mistakes are learned only after a new automotive part is launched. This is the main explanation for poor automotive parts design, from product mismatch, poor engineering and function or finish, and overpriced production. In order to accelerate the learning curve, before these costly automotive prototyping mistakes are made, one must accelerate and facilitate feedback loops from tests in the lab and market trials.

Automotive Manufacturing Technologies

Working with an assortment of rapid prototyping equipment, automotive prototyping engineers utilize the most advanced 3D printers, in their quest for perfect form, function and utility. Working in advanced manufacturing centers, the automotive engineers use the technology to verify what they are doing, and, equally important, to save tremendous amounts of time, and money.

Automotive Rapid Prototyping Compresses Development Time

The advantages of 3D rapid prototyping model creation versus viewing a cad/cam model on a computer screen is palpable. Automotive parts engineers get together discuss the pros and cons of a rapidly produced automotive parts model and discuss the pros and cons of the design, as they pass it around, twisting and viewing the prototype, and decide if that is what they had in mind. This way, problems get solved up front, before going to the assembly line! Once determined that the automotive prototype design is a go, the model can then be sent to a die maker.

Automotive Prototyping and the Die Maker Process

The die maker cannot use model to make the die, but because they have it in their hand and can look at it and feel it, they can determine where the parting lines will be and exactly how much steel they will need to produce it. The timing of the die process is greatly compressed.

Examples of Automotive Rapid Prototyping Parts

· Engine castings and parts

· Car Engine parts

· Auto Mechanical parts

· Car Dashboards

· Car Handles and Knobs

· Auto Body Components

· Car Trim parts

Fail first Paradox in Automotive Rapid Prototyping

The automotive rapid prototyping paradox is to fail earlier rather than later. By failing earlier, the design engineers surprisingly succeed in accelerating the project; this greatly reduces development cost risk. By considering all automotive prototype failures as learning experiments, the engineer has much less stress, knowing that they are practicing the old adage, that success comes from ninety-nine percent failure and introspection.